爱刨根知识网

  1. 首页 > 经验知识 > >

如何一键部署ssr,ssr占用率

生活经验ssr



环境
CentOS7.9
## 基础配置 # 关闭防火墙systemctl stop firewalld && systemctl disable firewalld# 关闭selinuxsed -i '/SELINUX=/s/enforcing/disabled/' /etc/selinux/config执行方式:
# 添加执行权限chmod +x ssr.sh bbr.sh# 安装ssr./ssr.sh#安装./bbr.sh

如何一键部署ssr,ssr占用率

文章插图


【如何一键部署ssr,ssr占用率】SSR脚本
#!/usr/bin/env bashPATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/binexport PATH#=================================================# System Required: CentOS 6+/Debian 6+/Ubuntu 14.04+# Description: Install the ShadowsocksR mudbjson server# Version: 1.0.26# Author: Toyo# Blog: ***="${Green_font_prefix}[信息]${Font_color_suffix}"Error="${Red_font_prefix}[错误]${Font_color_suffix}"Tip="${Green_font_prefix}[注意]${Font_color_suffix}"Separator_1="——————————————————————————————"check_root(){ [[ $EUID != 0 ]] && echo -e "${Error} 当前账号非ROOT(或没有ROOT权限) ， 无法继续操作 ， 请使用${Green_background_prefix} sudo su ${Font_color_suffix}来获取临时ROOT权限（执行后会提示输入当前账号的密码） 。" && exit 1}check_sys(){ if [[ -f /etc/redhat-release ]]; then release="centos" elif cat /etc/issue | grep -q -E -i "debian"; then release="debian" elif cat /etc/issue | grep -q -E -i "ubuntu"; then release="ubuntu" elif cat /etc/issue | grep -q -E -i "centos|red hat|redhat"; then release="centos" elif cat /proc/version | grep -q -E -i "debian"; then release="debian" elif cat /proc/version | grep -q -E -i "ubuntu"; then release="ubuntu" elif cat /proc/version | grep -q -E -i "centos|red hat|redhat"; then release="centos" fi bit=`uname -m`}check_pid(){ PID=`ps -ef |grep -v grep | grep server.py |awk '{print $2}'`}check_crontab(){ [[ ! -e "/usr/bin/crontab" ]] && echo -e "${Error} 缺少依赖 Crontab  ， 请尝试手动安装 CentOS: yum install crond -y , Debian/Ubuntu: apt-get install cron -y !" && exit 1}SSR_installation_status(){ [[ ! -e ${ssr_folder} ]] && echo -e "${Error} 没有发现 ShadowsocksR 文件夹 ， 请检查 !" && exit 1}Server_Speeder_installation_status(){ [[ ! -e ${Server_Speeder_file} ]] && echo -e "${Error} 没有安装 锐速(Server Speeder) ， 请检查 !" && exit 1}LotServer_installation_status(){ [[ ! -e ${LotServer_file} ]] && echo -e "${Error} 没有安装 LotServer ， 请检查 !" && exit 1}BBR_installation_status(){ if [[ ! -e ${BBR_file} ]]; then echo -e "${Error} 没有发现 BBR脚本 ， 开始下载..." cd "${file}" if ! wget -N --no-check-certificate ***/ToyoDAdoubi/doubi/master/bbr.sh; then echo -e "${Error} BBR 脚本下载失败 !" && exit 1 else echo -e "${Info} BBR 脚本下载完成 !" chmod +x bbr.sh fi fi}# 设置 防火墙规则Add_iptables(){ if [[ ! -z "${ssr_port}" ]]; then iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport ${ssr_port} -j ACCEPT iptables -I INPUT -m state --state NEW -m udp -p udp --dport ${ssr_port} -j ACCEPT ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport ${ssr_port} -j ACCEPT ip6tables -I INPUT -m state --state NEW -m udp -p udp --dport ${ssr_port} -j ACCEPT fi}Del_iptables(){ if [[ ! -z "${port}" ]]; then iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport ${port} -j ACCEPT iptables -D INPUT -m state --state NEW -m udp -p udp --dport ${port} -j ACCEPT ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport ${port} -j ACCEPT ip6tables -D INPUT -m state --state NEW -m udp -p udp --dport ${port} -j ACCEPT fi}Save_iptables(){ if [[ ${release} == "centos" ]]; then service iptables save service ip6tables save else iptables-save > /etc/iptables.up.rules ip6tables-save > /etc/ip6tables.up.rules fi}Set_iptables(){ if [[ ${release} == "centos" ]]; then service iptables save service ip6tables save chkconfig --level 2345 iptables on chkconfig --level 2345 ip6tables on else iptables-save > /etc/iptables.up.rules ip6tables-save > /etc/ip6tables.up.rules echo -e '#!/bin/bash\n/sbin/iptables-restore < /etc/iptables.up.rules\n/sbin/ip6tables-restore < /etc/ip6tables.up.rules' > /etc/network/if-pre-up.d/iptables chmod +x /etc/network/if-pre-up.d/iptables fi}# 读取 配置信息Get_IP(){ ip=$(wget -qO- -t1 -T2 ipinfo.io/ip) if [[ -z "${ip}" ]]; then ip=$(wget -qO- -t1 -T2 api.ip.sb/ip) if [[ -z "${ip}" ]]; then ip=$(wget -qO- -t1 -T2 members.3322.org/dyndns/getip) if [[ -z "${ip}" ]]; then ip="VPS_IP" fi fi fi}Get_User_info(){ Get_user_port=$1 user_info_get=$(python mujson_mgr.py -l -p "${Get_user_port}") match_info=$(echo "${user_info_get}"|grep -w "### user ") if [[ -z "${match_info}" ]]; then echo -e "${Error} 用户信息获取失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 fi user_name=$(echo "${user_info_get}"|grep -w "user :"|awk -F "user : " '{print $NF}') port=$(echo "${user_info_get}"|grep -w "port :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') password=$(echo "${user_info_get}"|grep -w "passwd :"|awk -F "passwd : " '{print $NF}') method=$(echo "${user_info_get}"|grep -w "method :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') protocol=$(echo "${user_info_get}"|grep -w "protocol :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') protocol_param=$(echo "${user_info_get}"|grep -w "protocol_param :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') [[ -z ${protocol_param} ]] && protocol_param="0(无限)" obfs=$(echo "${user_info_get}"|grep -w "obfs :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') #transfer_enable=$(echo "${user_info_get}"|grep -w "transfer_enable :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}'|awk -F "ytes" '{print $1}'|sed 's/KB/ KB/;s/MB/ MB/;s/GB/ GB/;s/TB/ TB/;s/PB/ PB/') #u=$(echo "${user_info_get}"|grep -w "u :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') #d=$(echo "${user_info_get}"|grep -w "d :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') forbidden_port=$(echo "${user_info_get}"|grep -w "forbidden_port :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') [[ -z ${forbidden_port} ]] && forbidden_port="无限制" speed_limit_per_con=$(echo "${user_info_get}"|grep -w "speed_limit_per_con :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') speed_limit_per_user=$(echo "${user_info_get}"|grep -w "speed_limit_per_user :"|sed 's/[[:space:]]//g'|awk -F ":" '{print $NF}') Get_User_transfer "${port}"}Get_User_transfer(){ transfer_port=$1 #echo "transfer_port=${transfer_port}" all_port=$(${jq_file} '.[]|.port' ${config_user_mudb_file}) #echo "all_port=${all_port}" port_num=$(echo "${all_port}"|grep -nw "${transfer_port}"|awk -F ":" '{print $1}') #echo "port_num=${port_num}" port_num_1=$(echo $((${port_num}-1))) #echo "port_num_1=${port_num_1}" transfer_enable_1=$(${jq_file} ".[${port_num_1}].transfer_enable" ${config_user_mudb_file}) #echo "transfer_enable_1=${transfer_enable_1}" u_1=$(${jq_file} ".[${port_num_1}].u" ${config_user_mudb_file}) #echo "u_1=${u_1}" d_1=$(${jq_file} ".[${port_num_1}].d" ${config_user_mudb_file}) #echo "d_1=${d_1}" transfer_enable_Used_2_1=$(echo $((${u_1}+${d_1}))) #echo "transfer_enable_Used_2_1=${transfer_enable_Used_2_1}" transfer_enable_Used_1=$(echo $((${transfer_enable_1}-${transfer_enable_Used_2_1}))) #echo "transfer_enable_Used_1=${transfer_enable_Used_1}" if [[ ${transfer_enable_1} -lt 1024 ]]; then transfer_enable="${transfer_enable_1} B" elif [[ ${transfer_enable_1} -lt 1048576 ]]; then transfer_enable=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_1}'/'1024'}') transfer_enable="${transfer_enable} KB" elif [[ ${transfer_enable_1} -lt 1073741824 ]]; then transfer_enable=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_1}'/'1048576'}') transfer_enable="${transfer_enable} MB" elif [[ ${transfer_enable_1} -lt 1099511627776 ]]; then transfer_enable=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_1}'/'1073741824'}') transfer_enable="${transfer_enable} GB" elif [[ ${transfer_enable_1} -lt 1125899906842624 ]]; then transfer_enable=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_1}'/'1099511627776'}') transfer_enable="${transfer_enable} TB" fi #echo "transfer_enable=${transfer_enable}" if [[ ${u_1} -lt 1024 ]]; then u="${u_1} B" elif [[ ${u_1} -lt 1048576 ]]; then u=$(awk 'BEGIN{printf "%.2f\n",'${u_1}'/'1024'}') u="${u} KB" elif [[ ${u_1} -lt 1073741824 ]]; then u=$(awk 'BEGIN{printf "%.2f\n",'${u_1}'/'1048576'}') u="${u} MB" elif [[ ${u_1} -lt 1099511627776 ]]; then u=$(awk 'BEGIN{printf "%.2f\n",'${u_1}'/'1073741824'}') u="${u} GB" elif [[ ${u_1} -lt 1125899906842624 ]]; then u=$(awk 'BEGIN{printf "%.2f\n",'${u_1}'/'1099511627776'}') u="${u} TB" fi #echo "u=${u}" if [[ ${d_1} -lt 1024 ]]; then d="${d_1} B" elif [[ ${d_1} -lt 1048576 ]]; then d=$(awk 'BEGIN{printf "%.2f\n",'${d_1}'/'1024'}') d="${d} KB" elif [[ ${d_1} -lt 1073741824 ]]; then d=$(awk 'BEGIN{printf "%.2f\n",'${d_1}'/'1048576'}') d="${d} MB" elif [[ ${d_1} -lt 1099511627776 ]]; then d=$(awk 'BEGIN{printf "%.2f\n",'${d_1}'/'1073741824'}') d="${d} GB" elif [[ ${d_1} -lt 1125899906842624 ]]; then d=$(awk 'BEGIN{printf "%.2f\n",'${d_1}'/'1099511627776'}') d="${d} TB" fi #echo "d=${d}" if [[ ${transfer_enable_Used_1} -lt 1024 ]]; then transfer_enable_Used="${transfer_enable_Used_1} B" elif [[ ${transfer_enable_Used_1} -lt 1048576 ]]; then transfer_enable_Used=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_1}'/'1024'}') transfer_enable_Used="${transfer_enable_Used} KB" elif [[ ${transfer_enable_Used_1} -lt 1073741824 ]]; then transfer_enable_Used=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_1}'/'1048576'}') transfer_enable_Used="${transfer_enable_Used} MB" elif [[ ${transfer_enable_Used_1} -lt 1099511627776 ]]; then transfer_enable_Used=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_1}'/'1073741824'}') transfer_enable_Used="${transfer_enable_Used} GB" elif [[ ${transfer_enable_Used_1} -lt 1125899906842624 ]]; then transfer_enable_Used=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_1}'/'1099511627776'}') transfer_enable_Used="${transfer_enable_Used} TB" fi #echo "transfer_enable_Used=${transfer_enable_Used}" if [[ ${transfer_enable_Used_2_1} -lt 1024 ]]; then transfer_enable_Used_2="${transfer_enable_Used_2_1} B" elif [[ ${transfer_enable_Used_2_1} -lt 1048576 ]]; then transfer_enable_Used_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_2_1}'/'1024'}') transfer_enable_Used_2="${transfer_enable_Used_2} KB" elif [[ ${transfer_enable_Used_2_1} -lt 1073741824 ]]; then transfer_enable_Used_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_2_1}'/'1048576'}') transfer_enable_Used_2="${transfer_enable_Used_2} MB" elif [[ ${transfer_enable_Used_2_1} -lt 1099511627776 ]]; then transfer_enable_Used_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_2_1}'/'1073741824'}') transfer_enable_Used_2="${transfer_enable_Used_2} GB" elif [[ ${transfer_enable_Used_2_1} -lt 1125899906842624 ]]; then transfer_enable_Used_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_2_1}'/'1099511627776'}') transfer_enable_Used_2="${transfer_enable_Used_2} TB" fi #echo "transfer_enable_Used_2=${transfer_enable_Used_2}"}Get_User_transfer_all(){ if [[ ${transfer_enable_Used_233} -lt 1024 ]]; then transfer_enable_Used_233_2="${transfer_enable_Used_233} B" elif [[ ${transfer_enable_Used_233} -lt 1048576 ]]; then transfer_enable_Used_233_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_233}'/'1024'}') transfer_enable_Used_233_2="${transfer_enable_Used_233_2} KB" elif [[ ${transfer_enable_Used_233} -lt 1073741824 ]]; then transfer_enable_Used_233_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_233}'/'1048576'}') transfer_enable_Used_233_2="${transfer_enable_Used_233_2} MB" elif [[ ${transfer_enable_Used_233} -lt 1099511627776 ]]; then transfer_enable_Used_233_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_233}'/'1073741824'}') transfer_enable_Used_233_2="${transfer_enable_Used_233_2} GB" elif [[ ${transfer_enable_Used_233} -lt 1125899906842624 ]]; then transfer_enable_Used_233_2=$(awk 'BEGIN{printf "%.2f\n",'${transfer_enable_Used_233}'/'1099511627776'}') transfer_enable_Used_233_2="${transfer_enable_Used_233_2} TB" fi}urlsafe_base64(){ date=$(echo -n "$1"|base64|sed ':a;N;s/\n/ /g;ta'|sed 's/ //g;s/=//g;s/+/-/g;s/\//_/g') echo -e "${date}"}ss_link_qr(){ SSbase64=$(urlsafe_base64 "${method}:${password}@${ip}:${port}") SSurl="ss://${SSbase64}" SSQRcode="***patible//g') SSRobfs=$(echo ${obfs} | sed 's/_compatible//g') SSRPWDbase64=$(urlsafe_base64 "${password}") SSRbase64=$(urlsafe_base64 "${ip}:${port}:${SSRprotocol}:${method}:${SSRobfs}:${SSRPWDbase64}") SSRurl="ssr://${SSRbase64}" SSRQRcode="***patible" ]]; then ss_link="" else ss_link_qr fi fi else if [[ ${protocol_suffix} != "compatible" ]]; then ss_link="" else if [[ ${obfs_suffix} != "compatible" ]]; then if [[ ${obfs_suffix} = "plain" ]]; then ss_link_qr else ss_link="" fi else ss_link_qr fi fi fi ssr_link_qr}# 显示 配置信息View_User(){ SSR_installation_status List_port_user while true do echo -e "请输入要查看账号信息的用户 端口" read -e -p "(默认: 取消):" View_user_port [[ -z "${View_user_port}" ]] && echo -e "已取消..." && exit 1 View_user=$(cat "${config_user_mudb_file}"|grep '"port": '"${View_user_port}"',') if [[ ! -z ${View_user} ]]; then Get_User_info "${View_user_port}" View_User_info break else echo -e "${Error} 请输入正确的端口 !" fi done}View_User_info(){ ip=$(cat ${config_user_api_file}|grep "SERVER_PUB_ADDR = "|awk -F "[']" '{print $2}') [[ -z "${ip}" ]] && Get_IP ss_ssr_determine clear && echo "===================================================" && echo echo -e " 用户 [${user_name}] 的配置信息：" && echo echo -e " I P\t : ${Green_font_prefix}${ip}${Font_color_suffix}" echo -e " 端口\t : ${Green_font_prefix}${port}${Font_color_suffix}" echo -e " 密码\t : ${Green_font_prefix}${password}${Font_color_suffix}" echo -e " 加密\t : ${Green_font_prefix}${method}${Font_color_suffix}" echo -e " 协议\t : ${Red_font_prefix}${protocol}${Font_color_suffix}" echo -e " 混淆\t : ${Red_font_prefix}${obfs}${Font_color_suffix}" echo -e " 设备数限制 : ${Green_font_prefix}${protocol_param}${Font_color_suffix}" echo -e " 单线程限速 : ${Green_font_prefix}${speed_limit_per_con} KB/S${Font_color_suffix}" echo -e " 用户总限速 : ${Green_font_prefix}${speed_limit_per_user} KB/S${Font_color_suffix}" echo -e " 禁止的端口 : ${Green_font_prefix}${forbidden_port} ${Font_color_suffix}" echo echo -e " 已使用流量 : 上传: ${Green_font_prefix}${u}${Font_color_suffix} + 下载: ${Green_font_prefix}${d}${Font_color_suffix} = ${Green_font_prefix}${transfer_enable_Used_2}${Font_color_suffix}" echo -e " 剩余的流量 : ${Green_font_prefix}${transfer_enable_Used} ${Font_color_suffix}" echo -e " 用户总流量 : ${Green_font_prefix}${transfer_enable} ${Font_color_suffix}" echo -e "${ss_link}" echo -e "${ssr_link}" echo -e " ${Green_font_prefix} 提示: ${Font_color_suffix} 在浏览器中 ， 打开二维码链接 ， 就可以看到二维码图片 。协议和混淆后面的[ _compatible ] ， 指的是 兼容原版协议/混淆 。" echo && echo "==================================================="}# 设置 配置信息Set_config_user(){ echo "请输入要设置的用户 用户名(请勿重复, 用于区分, 不支持中文、空格, 会报错 !)" read -e -p "(默认: doubi):" ssr_user [[ -z "${ssr_user}" ]] && ssr_user="doubi" ssr_user=$(echo "${ssr_user}"|sed 's/ //g') echo && echo ${Separator_1} && echo -e " 用户名 : ${Green_font_prefix}${ssr_user}${Font_color_suffix}" && echo ${Separator_1} && echo}Set_config_port(){ while true do echo -e "请输入要设置的用户 端口(请勿重复, 用于区分)" read -e -p "(默认: 2333):" ssr_port [[ -z "$ssr_port" ]] && ssr_port="2333" echo $((${ssr_port}+0)) &>/dev/null if [[ $? == 0 ]]; then if [[ ${ssr_port} -ge 1 ]] && [[ ${ssr_port} -le 65535 ]]; then echo && echo ${Separator_1} && echo -e " 端口 : ${Green_font_prefix}${ssr_port}${Font_color_suffix}" && echo ${Separator_1} && echo break else echo -e "${Error} 请输入正确的数字(1-65535)" fi else echo -e "${Error} 请输入正确的数字(1-65535)" fi done}Set_config_password(){ echo "请输入要设置的用户 密码" read -e -p "(默认: doub.io):" ssr_password [[ -z "${ssr_password}" ]] && ssr_password="doub.io" echo && echo ${Separator_1} && echo -e " 密码 : ${Green_font_prefix}${ssr_password}${Font_color_suffix}" && echo ${Separator_1} && echo}Set_config_method(){ echo -e "请选择要设置的用户 加密方式 ${Green_font_prefix} 1.${Font_color_suffix} none ${Tip} 如果使用 auth_chain_* 系列协议 ， 建议加密方式选择 none (该系列协议自带 RC4 加密) ， 混淆随意 ${Green_font_prefix} 2.${Font_color_suffix} rc4 ${Green_font_prefix} 3.${Font_color_suffix} rc4-md5 ${Green_font_prefix} 4.${Font_color_suffix} rc4-md5-6 ${Green_font_prefix} 5.${Font_color_suffix} aes-128-ctr ${Green_font_prefix} 6.${Font_color_suffix} aes-192-ctr ${Green_font_prefix} 7.${Font_color_suffix} aes-256-ctr ${Green_font_prefix} 8.${Font_color_suffix} aes-128-cfb ${Green_font_prefix} 9.${Font_color_suffix} aes-192-cfb ${Green_font_prefix}10.${Font_color_suffix} aes-256-cfb ${Green_font_prefix}11.${Font_color_suffix} aes-128-cfb8 ${Green_font_prefix}12.${Font_color_suffix} aes-192-cfb8 ${Green_font_prefix}13.${Font_color_suffix} aes-256-cfb8 ${Green_font_prefix}14.${Font_color_suffix} salsa20 ${Green_font_prefix}15.${Font_color_suffix} chacha20 ${Green_font_prefix}16.${Font_color_suffix} chacha20-ietf ${Tip} salsa20/chacha20-*系列加密方式 ， 需要额外安装依赖 libsodium  ， 否则会无法启动ShadowsocksR !" && echo read -e -p "(默认: 5. aes-128-ctr):" ssr_method [[ -z "${ssr_method}" ]] && ssr_method="5" if [[ ${ssr_method} == "1" ]]; then ssr_method="none" elif [[ ${ssr_method} == "2" ]]; then ssr_method="rc4" elif [[ ${ssr_method} == "3" ]]; then ssr_method="rc4-md5" elif [[ ${ssr_method} == "4" ]]; then ssr_method="rc4-md5-6" elif [[ ${ssr_method} == "5" ]]; then ssr_method="aes-128-ctr" elif [[ ${ssr_method} == "6" ]]; then ssr_method="aes-192-ctr" elif [[ ${ssr_method} == "7" ]]; then ssr_method="aes-256-ctr" elif [[ ${ssr_method} == "8" ]]; then ssr_method="aes-128-cfb" elif [[ ${ssr_method} == "9" ]]; then ssr_method="aes-192-cfb" elif [[ ${ssr_method} == "10" ]]; then ssr_method="aes-256-cfb" elif [[ ${ssr_method} == "11" ]]; then ssr_method="aes-128-cfb8" elif [[ ${ssr_method} == "12" ]]; then ssr_method="aes-192-cfb8" elif [[ ${ssr_method} == "13" ]]; then ssr_method="aes-256-cfb8" elif [[ ${ssr_method} == "14" ]]; then ssr_method="salsa20" elif [[ ${ssr_method} == "15" ]]; then ssr_method="chacha20" elif [[ ${ssr_method} == "16" ]]; then ssr_method="chacha20-ietf" else ssr_method="aes-128-ctr" fi echo && echo ${Separator_1} && echo -e " 加密 : ${Green_font_prefix}${ssr_method}${Font_color_suffix}" && echo ${Separator_1} && echo}Set_config_protocol(){ echo -e "请选择要设置的用户 协议插件 ${Green_font_prefix}1.${Font_color_suffix} origin ${Green_font_prefix}2.${Font_color_suffix} auth_sha1_v4 ${Green_font_prefix}3.${Font_color_suffix} auth_aes128_md5 ${Green_font_prefix}4.${Font_color_suffix} auth_aes128_sha1 ${Green_font_prefix}5.${Font_color_suffix} auth_chain_a ${Green_font_prefix}6.${Font_color_suffix} auth_chain_b ${Tip} 如果使用 auth_chain_* 系列协议 ， 建议加密方式选择 none (该系列协议自带 RC4 加密) ， 混淆随意" && echo read -e -p "(默认: 3. auth_aes128_md5):" ssr_protocol [[ -z "${ssr_protocol}" ]] && ssr_protocol="3" if [[ ${ssr_protocol} == "1" ]]; then ssr_protocol="origin" elif [[ ${ssr_protocol} == "2" ]]; then ssr_protocol="auth_sha1_v4" elif [[ ${ssr_protocol} == "3" ]]; then ssr_protocol="auth_aes128_md5" elif [[ ${ssr_protocol} == "4" ]]; then ssr_protocol="auth_aes128_sha1" elif [[ ${ssr_protocol} == "5" ]]; then ssr_protocol="auth_chain_a" elif [[ ${ssr_protocol} == "6" ]]; then ssr_protocol="auth_chain_b" else ssr_protocol="auth_aes128_md5" fi echo && echo ${Separator_1} && echo -e " 协议 : ${Green_font_prefix}${ssr_protocol}${Font_color_suffix}" && echo ${Separator_1} && echo if [[ ${ssr_protocol} != "origin" ]]; then if [[ ${ssr_protocol} == "auth_sha1_v4" ]]; then read -e -p "是否设置 协议插件兼容原版(_compatible)？[Y/n]" ssr_protocol_yn [[ -z "${ssr_protocol_yn}" ]] && ssr_protocol_yn="y" [[ $ssr_protocol_yn == [Yy] ]] && ssr_protocol=${ssr_protocol}"_compatible" echo fi fi}Set_config_obfs(){ echo -e "请选择要设置的用户 混淆插件 ${Green_font_prefix}1.${Font_color_suffix} plain ${Green_font_prefix}2.${Font_color_suffix} ***patible)？[Y/n]" ssr_obfs_yn [[ -z "${ssr_obfs_yn}" ]] && ssr_obfs_yn="y" [[ $ssr_obfs_yn == [Yy] ]] && ssr_obfs=${ssr_obfs}"_compatible" echo fi}Set_config_protocol_param(){ while true do echo -e "请输入要设置的用户 欲限制的设备数 (${Green_font_prefix} auth_* 系列协议 不兼容原版才有效 ${Font_color_suffix})" echo -e "${Tip} 设备数限制：每个端口同一时间能链接的客户端数量(多端口模式 ， 每个端口都是独立计算) ， 建议最少 2个 。" read -e -p "(默认: 无限):" ssr_protocol_param [[ -z "$ssr_protocol_param" ]] && ssr_protocol_param="" && echo && break echo $((${ssr_protocol_param}+0)) &>/dev/null if [[ $? == 0 ]]; then if [[ ${ssr_protocol_param} -ge 1 ]] && [[ ${ssr_protocol_param} -le 9999 ]]; then echo && echo ${Separator_1} && echo -e " 设备数限制 : ${Green_font_prefix}${ssr_protocol_param}${Font_color_suffix}" && echo ${Separator_1} && echo break else echo -e "${Error} 请输入正确的数字(1-9999)" fi else echo -e "${Error} 请输入正确的数字(1-9999)" fi done}Set_config_speed_limit_per_con(){ while true do echo -e "请输入要设置的用户 单线程 限速上限(单位：KB/S)" echo -e "${Tip} 单线程限速：每个端口 单线程的限速上限 ， 多线程即无效 。" read -e -p "(默认: 无限):" ssr_speed_limit_per_con [[ -z "$ssr_speed_limit_per_con" ]] && ssr_speed_limit_per_con=0 && echo && break echo $((${ssr_speed_limit_per_con}+0)) &>/dev/null if [[ $? == 0 ]]; then if [[ ${ssr_speed_limit_per_con} -ge 1 ]] && [[ ${ssr_speed_limit_per_con} -le 131072 ]]; then echo && echo ${Separator_1} && echo -e " 单线程限速 : ${Green_font_prefix}${ssr_speed_limit_per_con} KB/S${Font_color_suffix}" && echo ${Separator_1} && echo break else echo -e "${Error} 请输入正确的数字(1-131072)" fi else echo -e "${Error} 请输入正确的数字(1-131072)" fi done}Set_config_speed_limit_per_user(){ while true do echo echo -e "请输入要设置的用户 总速度 限速上限(单位：KB/S)" echo -e "${Tip} 端口总限速：每个端口 总速度 限速上限 ， 单个端口整体限速 。" read -e -p "(默认: 无限):" ssr_speed_limit_per_user [[ -z "$ssr_speed_limit_per_user" ]] && ssr_speed_limit_per_user=0 && echo && break echo $((${ssr_speed_limit_per_user}+0)) &>/dev/null if [[ $? == 0 ]]; then if [[ ${ssr_speed_limit_per_user} -ge 1 ]] && [[ ${ssr_speed_limit_per_user} -le 131072 ]]; then echo && echo ${Separator_1} && echo -e " 用户总限速 : ${Green_font_prefix}${ssr_speed_limit_per_user} KB/S${Font_color_suffix}" && echo ${Separator_1} && echo break else echo -e "${Error} 请输入正确的数字(1-131072)" fi else echo -e "${Error} 请输入正确的数字(1-131072)" fi done}Set_config_transfer(){ while true do echo echo -e "请输入要设置的用户 可使用的总流量上限(单位: GB, 1-838868 GB)" read -e -p "(默认: 无限):" ssr_transfer [[ -z "$ssr_transfer" ]] && ssr_transfer="838868" && echo && break echo $((${ssr_transfer}+0)) &>/dev/null if [[ $? == 0 ]]; then if [[ ${ssr_transfer} -ge 1 ]] && [[ ${ssr_transfer} -le 838868 ]]; then echo && echo ${Separator_1} && echo -e " 用户总流量 : ${Green_font_prefix}${ssr_transfer} GB${Font_color_suffix}" && echo ${Separator_1} && echo break else echo -e "${Error} 请输入正确的数字(1-838868)" fi else echo -e "${Error} 请输入正确的数字(1-838868)" fi done}Set_config_forbid(){ echo "请输入要设置的用户 禁止访问的端口" echo -e "${Tip} 禁止的端口：例如不允许访问 25端口 ， 用户就无法通过SSR代理访问 邮件端口25了 ， 如果禁止了 80,443 那么用户将无法正常访问 ***} 当前配置的服务器IP或域名为： ${Green_font_prefix}${server_pub_addr}${Font_color_suffix}" fi fi echo "请输入用户配置中要显示的 服务器IP或域名 (当服务器有多个IP时 ， 可以指定用户配置中显示的IP或者域名)" read -e -p "(默认自动检测外网IP):" ssr_server_pub_addr if [[ -z "${ssr_server_pub_addr}" ]]; then Get_IP if [[ ${ip} == "VPS_IP" ]]; then while true do read -e -p "${Error} 自动检测外网IP失败 ， 请手动输入服务器IP或域名" ssr_server_pub_addr if [[ -z "$ssr_server_pub_addr" ]]; then echo -e "${Error} 不能为空！" else break fi done else ssr_server_pub_addr="${ip}" fi fi echo && echo ${Separator_1} && echo -e " IP或域名 : ${Green_font_prefix}${ssr_server_pub_addr}${Font_color_suffix}" && echo ${Separator_1} && echo}Set_config_all(){ lal=$1 if [[ "${lal}" == "Modify" ]]; then Set_config_password Set_config_method Set_config_protocol Set_config_obfs Set_config_protocol_param Set_config_speed_limit_per_con Set_config_speed_limit_per_user Set_config_transfer Set_config_forbid else Set_config_user Set_config_port Set_config_password Set_config_method Set_config_protocol Set_config_obfs Set_config_protocol_param Set_config_speed_limit_per_con Set_config_speed_limit_per_user Set_config_transfer Set_config_forbid fi}# 修改 配置信息Modify_config_password(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -k "${ssr_password}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户密码修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户密码修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_method(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -m "${ssr_method}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户加密方式修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户加密方式修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_protocol(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -O "${ssr_protocol}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户协议修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户协议修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_obfs(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -o "${ssr_obfs}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户混淆修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户混淆修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_protocol_param(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -G "${ssr_protocol_param}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户协议参数(设备数限制)修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户议参数(设备数限制)修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_speed_limit_per_con(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -s "${ssr_speed_limit_per_con}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户单线程限速修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户单线程限速修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_speed_limit_per_user(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -S "${ssr_speed_limit_per_user}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户端口总限速修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户端口总限速修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_connect_verbose_info(){ sed -i 's/"connect_verbose_info": '"$(echo ${connect_verbose_info})"',/"connect_verbose_info": '"$(echo ${ssr_connect_verbose_info})"',/g' ${config_user_file}}Modify_config_transfer(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -t "${ssr_transfer}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户总流量修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户总流量修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_forbid(){ match_edit=$(python mujson_mgr.py -e -p "${ssr_port}" -f "${ssr_forbid}"|grep -w "edit user ") if [[ -z "${match_edit}" ]]; then echo -e "${Error} 用户禁止访问端口修改失败 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} " && exit 1 else echo -e "${Info} 用户禁止访问端口修改成功 ${Green_font_prefix}[端口: ${ssr_port}]${Font_color_suffix} (注意：可能需要十秒左右才会应用最新配置)" fi}Modify_config_enable(){ sed -i "${ssr_enable_num}"'s/"enable": '"$(echo ${enable})"',/"enable": '"$(echo ${ssr_enable})"',/' ${config_user_mudb_file}}Modify_user_api_server_pub_addr(){ sed -i "s/SERVER_PUB_ADDR = '${server_pub_addr}'/SERVER_PUB_ADDR = '${ssr_server_pub_addr}'/" ${config_user_api_file}}Modify_config_all(){ Modify_config_password Modify_config_method Modify_config_protocol Modify_config_obfs Modify_config_protocol_param Modify_config_speed_limit_per_con Modify_config_speed_limit_per_user Modify_config_transfer Modify_config_forbid}Check_python(){ python_ver=`python -h` if [[ -z ${python_ver} ]]; then echo -e "${Info} 没有安装Python ， 开始安装..." if [[ ${release} == "centos" ]]; then yum install -y python else apt-get install -y python fi fi}Centos_yum(){ yum update -y cat /etc/redhat-release |grep 7\..*|grep -i centos>/dev/null if [[ $? = 0 ]]; then yum install -y vim unzip crond net-tools wget else yum install -y vim unzip crond wget fi}Debian_apt(){ apt-get update cat /etc/issue |grep 9\..*>/dev/null if [[ $? = 0 ]]; then apt-get install -y vim unzip cron net-tools else apt-get install -y vim unzip cron fi}# 下载 ShadowsocksRDownload_SSR(){ cd "/usr/local" wget -N --no-check-certificate "***/ToyoDAdoubiBackup/shadowsocksr/archive/manyuser.zip" #git config --global http.sslVerify false #env GIT_SSL_NO_VERIFY=true git clone -b manyuser ***/ToyoDAdoubiBackup/shadowsocksr.git #[[ ! -e ${ssr_folder} ]] && echo -e "${Error} ShadowsocksR服务端 下载失败 !" && exit 1 [[ ! -e "manyuser.zip" ]] && echo -e "${Error} ShadowsocksR服务端 压缩包 下载失败 !" && rm -rf manyuser.zip && exit 1 unzip "manyuser.zip" [[ ! -e "/usr/local/shadowsocksr-manyuser/" ]] && echo -e "${Error} ShadowsocksR服务端 解压失败 !" && rm -rf manyuser.zip && exit 1 mv "/usr/local/shadowsocksr-manyuser/" "/usr/local/shadowsocksr/" [[ ! -e "/usr/local/shadowsocksr/" ]] && echo -e "${Error} ShadowsocksR服务端 重命名失败 !" && rm -rf manyuser.zip && rm -rf "/usr/local/shadowsocksr-manyuser/" && exit 1 rm -rf manyuser.zip cd "shadowsocksr" cp "${ssr_folder}/config.json" "${config_user_file}" cp "${ssr_folder}/mysql.json" "${ssr_folder}/usermysql.json" cp "${ssr_folder}/apiconfig.py" "${config_user_api_file}" [[ ! -e ${config_user_api_file} ]] && echo -e "${Error} ShadowsocksR服务端 apiconfig.py 复制失败 !" && exit 1 sed -i "s/API_INTERFACE = 'sspanelv2'/API_INTERFACE = 'mudbjson'/" ${config_user_api_file} server_pub_addr="127.0.0.1" Modify_user_api_server_pub_addr #sed -i "s/SERVER_PUB_ADDR = '127.0.0.1'/SERVER_PUB_ADDR = '${ip}'/" ${config_user_api_file} sed -i 's/ \/\/ only works under multi-user mode//g' "${config_user_file}" echo -e "${Info} ShadowsocksR服务端 下载完成 !"}Service_SSR(){ if [[ ${release} = "centos" ]]; then if ! wget --no-check-certificate ***/ToyoDAdoubi/doubi/master/service/ssrmu_centos -O /etc/init.d/ssrmu; then echo -e "${Error} ShadowsocksR服务 管理脚本下载失败 !" && exit 1 fi chmod +x /etc/init.d/ssrmu chkconfig --add ssrmu chkconfig ssrmu on else if ! wget --no-check-certificate ***/ToyoDAdoubi/doubi/master/service/ssrmu_debian -O /etc/init.d/ssrmu; then echo -e "${Error} ShadowsocksR服务 管理脚本下载失败 !" && exit 1 fi chmod +x /etc/init.d/ssrmu update-rc.d -f ssrmu defaults fi echo -e "${Info} ShadowsocksR服务 管理脚本下载完成 !"}# 安装 JQ解析器JQ_install(){ if [[ ! -e ${jq_file} ]]; then cd "${ssr_folder}" if [[ ${bit} = "x86_64" ]]; then mv "jq-linux64" "jq" #wget --no-check-certificate "***/stedolan/jq/releases/download/jq-1.5/jq-linux64" -O ${jq_file} else mv "jq-linux32" "jq" #wget --no-check-certificate "***/stedolan/jq/releases/download/jq-1.5/jq-linux32" -O ${jq_file} fi [[ ! -e ${jq_file} ]] && echo -e "${Error} JQ解析器 重命名失败 ， 请检查 !" && exit 1 chmod +x ${jq_file} echo -e "${Info} JQ解析器 安装完成 ， 继续..." else echo -e "${Info} JQ解析器 已安装 ， 继续..." fi}# 安装 依赖Installation_dependency(){ if [[ ${release} == "centos" ]]; then Centos_yum else Debian_apt fi [[ ! -e "/usr/bin/unzip" ]] && echo -e "${Error} 依赖 unzip(解压压缩包) 安装失败 ， 多半是软件包源的问题 ， 请检查 !" && exit 1 Check_python #echo "nameserver 8.8.8.8" > /etc/resolv.conf #echo "nameserver 8.8.4.4" >> /etc/resolv.conf \cp -f /usr/share/zoneinfo/Asia/Shanghai /etc/localtime if [[ ${release} == "centos" ]]; then /etc/init.d/crond restart else /etc/init.d/cron restart fi}Install_SSR(){ check_root [[ -e ${ssr_folder} ]] && echo -e "${Error} ShadowsocksR 文件夹已存在 ， 请检查( 如安装失败或者存在旧版本 ， 请先卸载 ) !" && exit 1 echo -e "${Info} 开始设置 ShadowsocksR账号配置..." Set_user_api_server_pub_addr Set_config_all echo -e "${Info} 开始安装/配置 ShadowsocksR依赖..." Installation_dependency echo -e "${Info} 开始下载/安装 ShadowsocksR文件..." Download_SSR echo -e "${Info} 开始下载/安装 ShadowsocksR服务脚本(init)..." Service_SSR echo -e "${Info} 开始下载/安装 JSNO解析器 JQ..." JQ_install echo -e "${Info} 开始添加初始用户..." Add_port_user "install" echo -e "${Info} 开始设置 iptables防火墙..." Set_iptables echo -e "${Info} 开始添加 iptables防火墙规则..." Add_iptables echo -e "${Info} 开始保存 iptables防火墙规则..." Save_iptables echo -e "${Info} 所有步骤 安装完毕 ， 开始启动 ShadowsocksR服务端..." Start_SSR Get_User_info "${ssr_port}" View_User_info}Update_SSR(){ SSR_installation_status echo -e "因破娃暂停更新ShadowsocksR服务端 ， 所以此功能临时禁用 。" #cd ${ssr_folder} #git pull #Restart_SSR}Uninstall_SSR(){ [[ ! -e ${ssr_folder} ]] && echo -e "${Error} 没有安装 ShadowsocksR ， 请检查 !" && exit 1 echo "确定要 卸载ShadowsocksR？[y/N]" && echo read -e -p "(默认: n):" unyn [[ -z ${unyn} ]] && unyn="n" if [[ ${unyn} == [Yy] ]]; then check_pid [[ ! -z "${PID}" ]] && kill -9 ${PID} user_info=$(python mujson_mgr.py -l) user_total=$(echo "${user_info}"|wc -l) if [[ ! -z ${user_info} ]]; then for((integer = 1; integer <= ${user_total}; integer++)) do port=$(echo "${user_info}"|sed -n "${integer}p"|awk '{print $4}') Del_iptables done Save_iptables fi if [[ ! -z $(crontab -l | grep "ssrmu.sh") ]]; then crontab_monitor_ssr_cron_stop Clear_transfer_all_cron_stop fi if [[ ${release} = "centos" ]]; then chkconfig --del ssrmu else update-rc.d -f ssrmu remove fi rm -rf ${ssr_folder} && rm -rf /etc/init.d/ssrmu echo && echo " ShadowsocksR 卸载完成 !" && echo else echo && echo " 卸载已取消..." && echo fi}Check_Libsodium_ver(){ echo -e "${Info} 开始获取 libsodium 最新版本..." Libsodiumr_ver=$(wget -qO- "***/jedisct1/libsodium/tags"|grep "/jedisct1/libsodium/releases/tag/"|head -1|sed -r 's/.*tag\/(.+)\">.*/\1/') [[ -z ${Libsodiumr_ver} ]] && Libsodiumr_ver=${Libsodiumr_ver_backup} echo -e "${Info} libsodium 最新版本为 ${Green_font_prefix}${Libsodiumr_ver}${Font_color_suffix} !"}Install_Libsodium(){ if [[ -e ${Libsodiumr_file} ]]; then echo -e "${Error} libsodium 已安装 , 是否覆盖安装(更新)？[y/N]" read -e -p "(默认: n):" yn [[ -z ${yn} ]] && yn="n" if [[ ${yn} == [Nn] ]]; then echo "已取消..." && exit 1 fi else echo -e "${Info} libsodium 未安装 ， 开始安装..." fi Check_Libsodium_ver if [[ ${release} == "centos" ]]; then yum update echo -e "${Info} 安装依赖..." yum -y groupinstall "Development Tools" echo -e "${Info} 下载..." wget --no-check-certificate -N "***/jedisct1/libsodium/releases/download/${Libsodiumr_ver}-RELEASE/libsodium-${Libsodiumr_ver}.tar.gz" echo -e "${Info} 解压..." tar -xzf libsodium-${Libsodiumr_ver}.tar.gz && cd libsodium-${Libsodiumr_ver} echo -e "${Info} 编译安装..." ./configure --disable-maintainer-mode && make -j2 && make install echo /usr/local/lib > /etc/ld.so.conf.d/usr_local_lib.conf else apt-get update echo -e "${Info} 安装依赖..." apt-get install -y build-essential echo -e "${Info} 下载..." wget --no-check-certificate -N "***/jedisct1/libsodium/releases/download/${Libsodiumr_ver}-RELEASE/libsodium-${Libsodiumr_ver}.tar.gz" echo -e "${Info} 解压..." tar -xzf libsodium-${Libsodiumr_ver}.tar.gz && cd libsodium-${Libsodiumr_ver} echo -e "${Info} 编译安装..." ./configure --disable-maintainer-mode && make -j2 && make install fi ldconfig cd .. && rm -rf libsodium-${Libsodiumr_ver}.tar.gz && rm -rf libsodium-${Libsodiumr_ver} [[ ! -e ${Libsodiumr_file} ]] && echo -e "${Error} libsodium 安装失败 !" && exit 1 echo && echo -e "${Info} libsodium 安装成功 !" && echo}# 显示 连接信息debian_View_user_connection_info(){ format_1=$1 user_info=$(python mujson_mgr.py -l) user_total=$(echo "${user_info}"|wc -l) [[ -z ${user_info} ]] && echo -e "${Error} 没有发现 用户 ， 请检查 !" && exit 1 IP_total=`netstat -anp |grep 'ESTABLISHED' |grep 'python' |grep 'tcp6' |awk '{print $5}' |awk -F ":" '{print $1}' |sort -u |grep -E -o "([0-9]{1,3}[\.]){3}[0-9]{1,3}" |wc -l` user_list_all="" for((integer = 1; integer <= ${user_total}; integer++)) do user_port=$(echo "${user_info}"|sed -n "${integer}p"|awk '{print $4}') user_IP_1=`netstat -anp |grep 'ESTABLISHED' |grep 'python' |grep 'tcp6' |grep ":${user_port} " |awk '{print $5}' |awk -F ":" '{print $1}' |sort -u |grep -E -o "([0-9]{1,3}[\.]){3}[0-9]{1,3}"` if [[ -z ${user_IP_1} ]]; then user_IP_total="0" else user_IP_total=`echo -e "${user_IP_1}"|wc -l` if [[ ${format_1} == "IP_address" ]]; then get_IP_address else user_IP=`echo -e "\n${user_IP_1}"` fi fi user_info_233=$(python mujson_mgr.py -l|grep -w "${user_port}"|awk '{print $2}'|sed 's/\[//g;s/\]//g') user_list_all=${user_list_all}"用户名: ${Green_font_prefix}"${user_info_233}"${Font_color_suffix}\t 端口: ${Green_font_prefix}"${user_port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: ${Green_font_prefix}${user_IP}${Font_color_suffix}\n" user_IP="" done echo -e "用户总数: ${Green_background_prefix} "${user_total}" ${Font_color_suffix} 链接IP总数: ${Green_background_prefix} "${IP_total}" ${Font_color_suffix} " echo -e "${user_list_all}"}centos_View_user_connection_info(){ format_1=$1 user_info=$(python mujson_mgr.py -l) user_total=$(echo "${user_info}"|wc -l) [[ -z ${user_info} ]] && echo -e "${Error} 没有发现 用户 ， 请检查 !" && exit 1 IP_total=`netstat -anp |grep 'ESTABLISHED' |grep 'python' |grep 'tcp' | grep '::ffff:' |awk '{print $5}' |awk -F ":" '{print $4}' |sort -u |grep -E -o "([0-9]{1,3}[\.]){3}[0-9]{1,3}" |wc -l` user_list_all="" for((integer = 1; integer <= ${user_total}; integer++)) do user_port=$(echo "${user_info}"|sed -n "${integer}p"|awk '{print $4}') user_IP_1=`netstat -anp |grep 'ESTABLISHED' |grep 'python' |grep 'tcp' |grep ":${user_port} "|grep '::ffff:' |awk '{print $5}' |awk -F ":" '{print $4}' |sort -u |grep -E -o "([0-9]{1,3}[\.]){3}[0-9]{1,3}"` if [[ -z ${user_IP_1} ]]; then user_IP_total="0" else user_IP_total=`echo -e "${user_IP_1}"|wc -l` if [[ ${format_1} == "IP_address" ]]; then get_IP_address else user_IP=`echo -e "\n${user_IP_1}"` fi fi user_info_233=$(python mujson_mgr.py -l|grep -w "${user_port}"|awk '{print $2}'|sed 's/\[//g;s/\]//g') user_list_all=${user_list_all}"用户名: ${Green_font_prefix}"${user_info_233}"${Font_color_suffix}\t 端口: ${Green_font_prefix}"${user_port}"${Font_color_suffix}\t 链接IP总数: ${Green_font_prefix}"${user_IP_total}"${Font_color_suffix}\t 当前链接IP: ${Green_font_prefix}${user_IP}${Font_color_suffix}\n" user_IP="" done echo -e "用户总数: ${Green_background_prefix} "${user_total}" ${Font_color_suffix} 链接IP总数: ${Green_background_prefix} "${IP_total}" ${Font_color_suffix} " echo -e "${user_list_all}"}View_user_connection_info(){ SSR_installation_status echo && echo -e "请选择要显示的格式： ${Green_font_prefix}1.${Font_color_suffix} 显示 IP 格式 ${Green_font_prefix}2.${Font_color_suffix} 显示 IP+IP归属地 格式" && echo read -e -p "(默认: 1):" ssr_connection_info [[ -z "${ssr_connection_info}" ]] && ssr_connection_info="1" if [[ ${ssr_connection_info} == "1" ]]; then View_user_connection_info_1 "" elif [[ ${ssr_connection_info} == "2" ]]; then echo -e "${Tip} 检测IP归属地(ipip.net) ， 如果IP较多 ， 可能时间会比较长..." View_user_connection_info_1 "IP_address" else echo -e "${Error} 请输入正确的数字(1-2)" && exit 1 fi}View_user_connection_info_1(){ format=$1 if [[ ${release} = "centos" ]]; then cat /etc/redhat-release |grep 7\..*|grep -i centos>/dev/null if [[ $? = 0 ]]; then debian_View_user_connection_info "$format" else centos_View_user_connection_info "$format" fi else debian_View_user_connection_info "$format" fi}get_IP_address(){ #echo "user_IP_1=${user_IP_1}" if [[ ! -z ${user_IP_1} ]]; then #echo "user_IP_total=${user_IP_total}" for((integer_1 = ${user_IP_total}; integer_1 >= 1; integer_1--)) do IP=`echo "${user_IP_1}" |sed -n "$integer_1"p` #echo "IP=${IP}" IP_address=`wget -qO- -t1 -T2 ***/${IP}|sed 's/\"//g;s/,//g;s/\[//g;s/\]//g'` #echo "IP_address=${IP_address}" user_IP="${user_IP}\n${IP}(${IP_address})" #echo "user_IP=${user_IP}" sleep 1s done fi}# 修改 用户配置Modify_port(){ List_port_user while true do echo -e "请输入要修改的用户 端口" read -e -p "(默认: 取消):" ssr_port [[ -z "${ssr_port}" ]] && echo -e "已取消..." && exit 1 Modify_user=$(cat "${config_user_mudb_file}"|grep '"port": '"${ssr_port}"',') if [[ ! -z ${Modify_user} ]]; then break else echo -e "${Error} 请输入正确的端口 !" fi done}Modify_Config(){ SSR_installation_status echo && echo -e "你要做什么？ ${Green_font_prefix}1.${Font_color_suffix} 添加 用户配置 ${Green_font_prefix}2.${Font_color_suffix} 删除 用户配置————— 修改 用户配置 ————— ${Green_font_prefix}3.${Font_color_suffix} 修改 用户密码 ${Green_font_prefix}4.${Font_color_suffix} 修改 加密方式 ${Green_font_prefix}5.${Font_color_suffix} 修改 协议插件 ${Green_font_prefix}6.${Font_color_suffix} 修改 混淆插件 ${Green_font_prefix}7.${Font_color_suffix} 修改 设备数限制 ${Green_font_prefix}8.${Font_color_suffix} 修改 单线程限速 ${Green_font_prefix}9.${Font_color_suffix} 修改 用户总限速 ${Green_font_prefix}10.${Font_color_suffix} 修改 用户总流量 ${Green_font_prefix}11.${Font_color_suffix} 修改 用户禁用端口 ${Green_font_prefix}12.${Font_color_suffix} 修改 全部配置————— 其他 ————— ${Green_font_prefix}13.${Font_color_suffix} 修改 用户配置中显示的IP或域名 ${Tip} 用户的用户名和端口是无法修改 ， 如果需要修改请使用脚本的 手动修改功能 !" && echo read -e -p "(默认: 取消):" ssr_modify [[ -z "${ssr_modify}" ]] && echo "已取消..." && exit 1 if [[ ${ssr_modify} == "1" ]]; then Add_port_user elif [[ ${ssr_modify} == "2" ]]; then Del_port_user elif [[ ${ssr_modify} == "3" ]]; then Modify_port Set_config_password Modify_config_password elif [[ ${ssr_modify} == "4" ]]; then Modify_port Set_config_method Modify_config_method elif [[ ${ssr_modify} == "5" ]]; then Modify_port Set_config_protocol Modify_config_protocol elif [[ ${ssr_modify} == "6" ]]; then Modify_port Set_config_obfs Modify_config_obfs elif [[ ${ssr_modify} == "7" ]]; then Modify_port Set_config_protocol_param Modify_config_protocol_param elif [[ ${ssr_modify} == "8" ]]; then Modify_port Set_config_speed_limit_per_con Modify_config_speed_limit_per_con elif [[ ${ssr_modify} == "9" ]]; then Modify_port Set_config_speed_limit_per_user Modify_config_speed_limit_per_user elif [[ ${ssr_modify} == "10" ]]; then Modify_port Set_config_transfer Modify_config_transfer elif [[ ${ssr_modify} == "11" ]]; then Modify_port Set_config_forbid Modify_config_forbid elif [[ ${ssr_modify} == "12" ]]; then Modify_port Set_config_all "Modify" Modify_config_all elif [[ ${ssr_modify} == "13" ]]; then Set_user_api_server_pub_addr "Modify" Modify_user_api_server_pub_addr else echo -e "${Error} 请输入正确的数字(1-13)" && exit 1 fi}List_port_user(){ user_info=$(python mujson_mgr.py -l) user_total=$(echo "${user_info}"|wc -l) [[ -z ${user_info} ]] && echo -e "${Error} 没有发现 用户 ， 请检查 !" && exit 1 user_list_all="" for((integer = 1; integer <= ${user_total}; integer++)) do user_port=$(echo "${user_info}"|sed -n "${integer}p"|awk '{print $4}') user_username=$(echo "${user_info}"|sed -n "${integer}p"|awk '{print $2}'|sed 's/\[//g;s/\]//g') Get_User_transfer "${user_port}" transfer_enable_Used_233=$(echo $((${transfer_enable_Used_233}+${transfer_enable_Used_2_1}))) user_list_all=${user_list_all}"用户名: ${Green_font_prefix} "${user_username}"${Font_color_suffix}\t 端口: ${Green_font_prefix}"${user_port}"${Font_color_suffix}\t 流量使用情况(已用+剩余=总): ${Green_font_prefix}${transfer_enable_Used_2}${Font_color_suffix} + ${Green_font_prefix}${transfer_enable_Used}${Font_color_suffix} = ${Green_font_prefix}${transfer_enable}${Font_color_suffix}\n" done Get_User_transfer_all echo && echo -e "=== 用户总数 ${Green_background_prefix} "${user_total}" ${Font_color_suffix}" echo -e ${user_list_all} echo -e "=== 当前所有用户已使用流量总和: ${Green_background_prefix} ${transfer_enable_Used_233_2} ${Font_color_suffix}\n"}Add_port_user(){ lalal=$1 if [[ "$lalal" == "install" ]]; then match_add=$(python mujson_mgr.py -a -u "${ssr_user}" -p "${ssr_port}" -k "${ssr_password}" -m "${ssr_method}" -O "${ssr_protocol}" -G "${ssr_protocol_param}" -o "${ssr_obfs}" -s "${ssr_speed_limit_per_con}" -S "${ssr_speed_limit_per_user}" -t "${ssr_transfer}" -f "${ssr_forbid}"|grep -w "add user info") else while true do Set_config_all match_port=$(python mujson_mgr.py -l|grep -w "port ${ssr_port}$") [[ ! -z "${match_port}" ]] && echo -e "${Error} 该端口 [${ssr_port}] 已存在 ， 请勿重复添加 !" && exit 1 match_username=$(python mujson_mgr.py -l|grep -w "user \[${ssr_user}]") [[ ! -z "${match_username}" ]] && echo -e "${Error} 该用户名 [${ssr_user}] 已存在 ， 请勿重复添加 !" && exit 1 match_add=$(python mujson_mgr.py -a -u "${ssr_user}" -p "${ssr_port}" -k "${ssr_password}" -m "${ssr_method}" -O "${ssr_protocol}" -G "${ssr_protocol_param}" -o "${ssr_obfs}" -s "${ssr_speed_limit_per_con}" -S "${ssr_speed_limit_per_user}" -t "${ssr_transfer}" -f "${ssr_forbid}"|grep -w "add user info") if [[ -z "${match_add}" ]]; then echo -e "${Error} 用户添加失败 ${Green_font_prefix}[用户名: ${ssr_user} , 端口: ${ssr_port}]${Font_color_suffix} " break else Add_iptables Save_iptables echo -e "${Info} 用户添加成功 ${Green_font_prefix}[用户名: ${ssr_user} , 端口: ${ssr_port}]${Font_color_suffix} " echo read -e -p "是否继续 添加用户配置？[Y/n]:" addyn [[ -z ${addyn} ]] && addyn="y" if [[ ${addyn} == [Nn] ]]; then Get_User_info "${ssr_port}" View_User_info break else echo -e "${Info} 继续 添加用户配置..." fi fi done fi}Del_port_user(){ List_port_user while true do echo -e "请输入要删除的用户 端口" read -e -p "(默认: 取消):" del_user_port [[ -z "${del_user_port}" ]] && echo -e "已取消..." && exit 1 del_user=$(cat "${config_user_mudb_file}"|grep '"port": '"${del_user_port}"',') if [[ ! -z ${del_user} ]]; then port=${del_user_port} match_del=$(python mujson_mgr.py -d -p "${del_user_port}"|grep -w "delete user ") if [[ -z "${match_del}" ]]; then echo -e "${Error} 用户删除失败 ${Green_font_prefix}[端口: ${del_user_port}]${Font_color_suffix} " else Del_iptables Save_iptables echo -e "${Info} 用户删除成功 ${Green_font_prefix}[端口: ${del_user_port}]${Font_color_suffix} " fi break else echo -e "${Error} 请输入正确的端口 !" fi done}Manually_Modify_Config(){ SSR_installation_status vi ${config_user_mudb_file} echo "是否现在重启ShadowsocksR？[Y/n]" && echo read -e -p "(默认: y):" yn [[ -z ${yn} ]] && yn="y" if [[ ${yn} == [Yy] ]]; then Restart_SSR fi}Clear_transfer(){ SSR_installation_status echo && echo -e "你要做什么？ ${Green_font_prefix}1.${Font_color_suffix} 清零 单个用户已使用流量 ${Green_font_prefix}2.${Font_color_suffix} 清零 所有用户已使用流量(不可挽回) ${Green_font_prefix}3.${Font_color_suffix} 启动 定时所有用户流量清零 ${Green_font_prefix}4.${Font_color_suffix} 停止 定时所有用户流量清零 ${Green_font_prefix}5.${Font_color_suffix} 修改 定时所有用户流量清零" && echo read -e -p "(默认: 取消):" ssr_modify [[ -z "${ssr_modify}" ]] && echo "已取消..." && exit 1 if [[ ${ssr_modify} == "1" ]]; then Clear_transfer_one elif [[ ${ssr_modify} == "2" ]]; then echo "确定要 清零 所有用户已使用流量？[y/N]" && echo read -e -p "(默认: n):" yn [[ -z ${yn} ]] && yn="n" if [[ ${yn} == [Yy] ]]; then Clear_transfer_all else echo "取消..." fi elif [[ ${ssr_modify} == "3" ]]; then check_crontab Set_crontab Clear_transfer_all_cron_start elif [[ ${ssr_modify} == "4" ]]; then check_crontab Clear_transfer_all_cron_stop elif [[ ${ssr_modify} == "5" ]]; then check_crontab Clear_transfer_all_cron_modify else echo -e "${Error} 请输入正确的数字(1-5)" && exit 1 fi}Clear_transfer_one(){ List_port_user while true do echo -e "请输入要清零已使用流量的用户 端口" read -e -p "(默认: 取消):" Clear_transfer_user_port [[ -z "${Clear_transfer_user_port}" ]] && echo -e "已取消..." && exit 1 Clear_transfer_user=$(cat "${config_user_mudb_file}"|grep '"port": '"${Clear_transfer_user_port}"',') if [[ ! -z ${Clear_transfer_user} ]]; then match_clear=$(python mujson_mgr.py -c -p "${Clear_transfer_user_port}"|grep -w "clear user ") if [[ -z "${match_clear}" ]]; then echo -e "${Error} 用户已使用流量清零失败 ${Green_font_prefix}[端口: ${Clear_transfer_user_port}]${Font_color_suffix} " else echo -e "${Info} 用户已使用流量清零成功 ${Green_font_prefix}[端口: ${Clear_transfer_user_port}]${Font_color_suffix} " fi break else echo -e "${Error} 请输入正确的端口 !" fi done}Clear_transfer_all(){ cd "${ssr_folder}" user_info=$(python mujson_mgr.py -l) user_total=$(echo "${user_info}"|wc -l) [[ -z ${user_info} ]] && echo -e "${Error} 没有发现 用户 ， 请检查 !" && exit 1 for((integer = 1; integer <= ${user_total}; integer++)) do user_port=$(echo "${user_info}"|sed -n "${integer}p"|awk '{print $4}') match_clear=$(python mujson_mgr.py -c -p "${user_port}"|grep -w "clear user ") if [[ -z "${match_clear}" ]]; then echo -e "${Error} 用户已使用流量清零失败 ${Green_font_prefix}[端口: ${user_port}]${Font_color_suffix} " else echo -e "${Info} 用户已使用流量清零成功 ${Green_font_prefix}[端口: ${user_port}]${Font_color_suffix} " fi done echo -e "${Info} 所有用户流量清零完毕 !"}Clear_transfer_all_cron_start(){ crontab -l > "$file/crontab.bak" sed -i "/ssrmu.sh/d" "$file/crontab.bak" echo -e "\n${Crontab_time} /bin/bash $file/ssrmu.sh clearall" >> "$file/crontab.bak" crontab "$file/crontab.bak" rm -r "$file/crontab.bak" cron_cOnfig=$(crontab -l | grep "ssrmu.sh") if [[ -z ${cron_config} ]]; then echo -e "${Error} 定时所有用户流量清零启动失败 !" && exit 1 else echo -e "${Info} 定时所有用户流量清零启动成功 !" fi}Clear_transfer_all_cron_stop(){ crontab -l > "$file/crontab.bak" sed -i "/ssrmu.sh/d" "$file/crontab.bak" crontab "$file/crontab.bak" rm -r "$file/crontab.bak" cron_cOnfig=$(crontab -l | grep "ssrmu.sh") if [[ ! -z ${cron_config} ]]; then echo -e "${Error} 定时所有用户流量清零停止失败 !" && exit 1 else echo -e "${Info} 定时所有用户流量清零停止成功 !" fi}Clear_transfer_all_cron_modify(){ Set_crontab Clear_transfer_all_cron_stop Clear_transfer_all_cron_start}Set_crontab(){ echo -e "请输入流量清零时间间隔 === 格式说明 === * * * * * 分别对应 分钟 小时 日份 月份 星期 ${Green_font_prefix} 0 2 1 * * ${Font_color_suffix} 代表 每月1日2点0分 清零已使用流量 ${Green_font_prefix} 0 2 15 * * ${Font_color_suffix} 代表 每月15日2点0分 清零已使用流量 ${Green_font_prefix} 0 2 */7 * * ${Font_color_suffix} 代表 每7天2点0分 清零已使用流量 ${Green_font_prefix} 0 2 * * 0 ${Font_color_suffix} 代表 每个星期日(7) 清零已使用流量 ${Green_font_prefix} 0 2 * * 3 ${Font_color_suffix} 代表 每个星期三(3) 清零已使用流量" && echo read -e -p "(默认: 0 2 1 * * 每月1日2点0分):" Crontab_time [[ -z "${Crontab_time}" ]] && Crontab_time="0 2 1 * *"}Start_SSR(){ SSR_installation_status check_pid [[ ! -z ${PID} ]] && echo -e "${Error} ShadowsocksR 正在运行 !" && exit 1 /etc/init.d/ssrmu start}Stop_SSR(){ SSR_installation_status check_pid [[ -z ${PID} ]] && echo -e "${Error} ShadowsocksR 未运行 !" && exit 1 /etc/init.d/ssrmu stop}Restart_SSR(){ SSR_installation_status check_pid [[ ! -z ${PID} ]] && /etc/init.d/ssrmu stop /etc/init.d/ssrmu start}View_Log(){ SSR_installation_status [[ ! -e ${ssr_log_file} ]] && echo -e "${Error} ShadowsocksR日志文件不存在 !" && exit 1 echo && echo -e "${Tip} 按 ${Red_font_prefix}Ctrl+C${Font_color_suffix} 终止查看日志" && echo -e "如果需要查看完整日志内容 ， 请用 ${Red_font_prefix}cat ${ssr_log_file}${Font_color_suffix} 命令 。" && echo tail -f ${ssr_log_file}}# 锐速Configure_Server_Speeder(){ echo && echo -e "你要做什么？ ${Green_font_prefix}1.${Font_color_suffix} 安装 锐速 ${Green_font_prefix}2.${Font_color_suffix} 卸载 锐速———————— ${Green_font_prefix}3.${Font_color_suffix} 启动 锐速 ${Green_font_prefix}4.${Font_color_suffix} 停止 锐速 ${Green_font_prefix}5.${Font_color_suffix} 重启 锐速 ${Green_font_prefix}6.${Font_color_suffix} 查看 锐速 状态 注意： 锐速和LotServer不能同时安装/启动！" && echo read -e -p "(默认: 取消):" server_speeder_num [[ -z "${server_speeder_num}" ]] && echo "已取消..." && exit 1 if [[ ${server_speeder_num} == "1" ]]; then Install_ServerSpeeder elif [[ ${server_speeder_num} == "2" ]]; then Server_Speeder_installation_status Uninstall_ServerSpeeder elif [[ ${server_speeder_num} == "3" ]]; then Server_Speeder_installation_status ${Server_Speeder_file} start ${Server_Speeder_file} status elif [[ ${server_speeder_num} == "4" ]]; then Server_Speeder_installation_status ${Server_Speeder_file} stop elif [[ ${server_speeder_num} == "5" ]]; then Server_Speeder_installation_status ${Server_Speeder_file} restart ${Server_Speeder_file} status elif [[ ${server_speeder_num} == "6" ]]; then Server_Speeder_installation_status ${Server_Speeder_file} status else echo -e "${Error} 请输入正确的数字(1-6)" && exit 1 fi}Install_ServerSpeeder(){ [[ -e ${Server_Speeder_file} ]] && echo -e "${Error} 锐速(Server Speeder) 已安装 !" && exit 1 #借用91yun.rog的开心版锐速 wget --no-check-certificate -qO /tmp/serverspeeder.sh ***/91yun/serverspeeder/master/serverspeeder.sh [[ ! -e "/tmp/serverspeeder.sh" ]] && echo -e "${Error} 锐速安装脚本下载失败 !" && exit 1 bash /tmp/serverspeeder.sh sleep 2s PID=`ps -ef |grep -v grep |grep "serverspeeder" |awk '{print $2}'` if [[ ! -z ${PID} ]]; then rm -rf /tmp/serverspeeder.sh rm -rf /tmp/91yunserverspeeder rm -rf /tmp/91yunserverspeeder.tar.gz echo -e "${Info} 锐速(Server Speeder) 安装完成 !" && exit 1 else echo -e "${Error} 锐速(Server Speeder) 安装失败 !" && exit 1 fi}Uninstall_ServerSpeeder(){ echo "确定要卸载 锐速(Server Speeder)？[y/N]" && echo read -e -p "(默认: n):" unyn [[ -z ${unyn} ]] && echo && echo "已取消..." && exit 1 if [[ ${unyn} == [Yy] ]]; then chattr -i /serverspeeder/etc/apx* /serverspeeder/bin/serverSpeeder.sh uninstall -f echo && echo "锐速(Server Speeder) 卸载完成 !" && echo fi}# LotServerConfigure_LotServer(){ echo && echo -e "你要做什么？ ${Green_font_prefix}1.${Font_color_suffix} 安装 LotServer ${Green_font_prefix}2.${Font_color_suffix} 卸载 LotServer———————— ${Green_font_prefix}3.${Font_color_suffix} 启动 LotServer ${Green_font_prefix}4.${Font_color_suffix} 停止 LotServer ${Green_font_prefix}5.${Font_color_suffix} 重启 LotServer ${Green_font_prefix}6.${Font_color_suffix} 查看 LotServer 状态 注意： 锐速和LotServer不能同时安装/启动！" && echo read -e -p "(默认: 取消):" lotserver_num [[ -z "${lotserver_num}" ]] && echo "已取消..." && exit 1 if [[ ${lotserver_num} == "1" ]]; then Install_LotServer elif [[ ${lotserver_num} == "2" ]]; then LotServer_installation_status Uninstall_LotServer elif [[ ${lotserver_num} == "3" ]]; then LotServer_installation_status ${LotServer_file} start ${LotServer_file} status elif [[ ${lotserver_num} == "4" ]]; then LotServer_installation_status ${LotServer_file} stop elif [[ ${lotserver_num} == "5" ]]; then LotServer_installation_status ${LotServer_file} restart ${LotServer_file} status elif [[ ${lotserver_num} == "6" ]]; then LotServer_installation_status ${LotServer_file} status else echo -e "${Error} 请输入正确的数字(1-6)" && exit 1 fi}Install_LotServer(){ [[ -e ${LotServer_file} ]] && echo -e "${Error} LotServer 已安装 !" && exit 1 #Github: ***/0oVicero0/serverSpeeder_Install wget --no-check-certificate -qO /tmp/appex.sh "***/0oVicero0/serverSpeeder_Install/master/appex.sh" [[ ! -e "/tmp/appex.sh" ]] && echo -e "${Error} LotServer 安装脚本下载失败 !" && exit 1 bash /tmp/appex.sh 'install' sleep 2s PID=`ps -ef |grep -v grep |grep "appex" |awk '{print $2}'` if [[ ! -z ${PID} ]]; then echo -e "${Info} LotServer 安装完成 !" && exit 1 else echo -e "${Error} LotServer 安装失败 !" && exit 1 fi}Uninstall_LotServer(){ echo "确定要卸载 LotServer？[y/N]" && echo read -e -p "(默认: n):" unyn [[ -z ${unyn} ]] && echo && echo "已取消..." && exit 1 if [[ ${unyn} == [Yy] ]]; then wget --no-check-certificate -qO /tmp/appex.sh "***/0oVicero0/serverSpeeder_Install/master/appex.sh" && bash /tmp/appex.sh 'uninstall' echo && echo "LotServer 卸载完成 !" && echo fi}# BBRConfigure_BBR(){ echo && echo -e " 你要做什么？ ${Green_font_prefix}1.${Font_color_suffix} 安装 BBR———————— ${Green_font_prefix}2.${Font_color_suffix} 启动 BBR ${Green_font_prefix}3.${Font_color_suffix} 停止 BBR ${Green_font_prefix}4.${Font_color_suffix} 查看 BBR 状态" && echoecho -e "${Green_font_prefix} [安装前 请注意] ${Font_color_suffix}1. 安装开启BBR ， 需要更换内核 ， 存在更换失败等风险(重启后无法开机)2. 本脚本仅支持 Debian / Ubuntu 系统更换内核 ， OpenVZ和Docker 不支持更换内核3. Debian 更换内核过程中会提示 [ 是否终止卸载内核 ]  ， 请选择 ${Green_font_prefix} NO ${Font_color_suffix}" && echo read -e -p "(默认: 取消):" bbr_num [[ -z "${bbr_num}" ]] && echo "已取消..." && exit 1 if [[ ${bbr_num} == "1" ]]; then Install_BBR elif [[ ${bbr_num} == "2" ]]; then Start_BBR elif [[ ${bbr_num} == "3" ]]; then Stop_BBR elif [[ ${bbr_num} == "4" ]]; then Status_BBR else echo -e "${Error} 请输入正确的数字(1-4)" && exit 1 fi}Install_BBR(){ [[ ${release} = "centos" ]] && echo -e "${Error} 本脚本不支持 CentOS系统安装 BBR !" && exit 1 BBR_installation_status bash "${BBR_file}"}Start_BBR(){ BBR_installation_status bash "${BBR_file}" start}Stop_BBR(){ BBR_installation_status bash "${BBR_file}" stop}Status_BBR(){ BBR_installation_status bash "${BBR_file}" status}# 其他功能Other_functions(){ echo && echo -e " 你要做什么？ ${Green_font_prefix}1.${Font_color_suffix} 配置 BBR ${Green_font_prefix}2.${Font_color_suffix} 配置 锐速(ServerSpeeder) ${Green_font_prefix}3.${Font_color_suffix} 配置 LotServer(锐速母公司) ${Tip} 锐速/LotServer/BBR 不支持 OpenVZ！ ${Tip} 锐速和LotServer不能共存！———————————— ${Green_font_prefix}4.${Font_color_suffix} 一键封禁 BT/PT/SPAM (iptables) ${Green_font_prefix}5.${Font_color_suffix} 一键解封 BT/PT/SPAM (iptables)———————————— ${Green_font_prefix}6.${Font_color_suffix} 切换 ShadowsocksR日志输出模式 —— 说明：SSR默认只输出错误日志 ， 此项可切换为输出详细的访问日志 。${Green_font_prefix}7.${Font_color_suffix} 监控 ShadowsocksR服务端运行状态 —— 说明：该功能适合于SSR服务端经常进程结束 ， 启动该功能后会每分钟检测一次 ， 当进程不存在则自动启动SSR服务端 。" && echo read -e -p "(默认: 取消):" other_num [[ -z "${other_num}" ]] && echo "已取消..." && exit 1 if [[ ${other_num} == "1" ]]; then Configure_BBR elif [[ ${other_num} == "2" ]]; then Configure_Server_Speeder elif [[ ${other_num} == "3" ]]; then Configure_LotServer elif [[ ${other_num} == "4" ]]; then BanBTPTSPAM elif [[ ${other_num} == "5" ]]; then UnBanBTPTSPAM elif [[ ${other_num} == "6" ]]; then Set_config_connect_verbose_info elif [[ ${other_num} == "7" ]]; then Set_crontab_monitor_ssr else echo -e "${Error} 请输入正确的数字 [1-7]" && exit 1 fi}# 封禁 BT PT SPAMBanBTPTSPAM(){ wget -N --no-check-certificate ***/ToyoDAdoubi/doubi/master/ban_iptables.sh && chmod +x ban_iptables.sh && bash ban_iptables.sh banall rm -rf ban_iptables.sh}# 解封 BT PT SPAMUnBanBTPTSPAM(){ wget -N --no-check-certificate ***/ToyoDAdoubi/doubi/master/ban_iptables.sh && chmod +x ban_iptables.sh && bash ban_iptables.sh unbanall rm -rf ban_iptables.sh}Set_config_connect_verbose_info(){ SSR_installation_status [[ ! -e ${jq_file} ]] && echo -e "${Error} JQ解析器 不存在 ， 请检查 !" && exit 1 connect_verbose_info=`${jq_file} '.connect_verbose_info' ${config_user_file}` if [[ ${connect_verbose_info} = "0" ]]; then echo && echo -e "当前日志模式: ${Green_font_prefix}简单模式（只输出错误日志）${Font_color_suffix}" && echo echo -e "确定要切换为 ${Green_font_prefix}详细模式（输出详细连接日志+错误日志）${Font_color_suffix}？[y/N]" read -e -p "(默认: n):" connect_verbose_info_ny [[ -z "${connect_verbose_info_ny}" ]] && connect_verbose_info_ny="n" if [[ ${connect_verbose_info_ny} == [Yy] ]]; then ssr_connect_verbose_info="1" Modify_config_connect_verbose_info Restart_SSR else echo && echo " 已取消..." && echo fi else echo && echo -e "当前日志模式: ${Green_font_prefix}详细模式（输出详细连接日志+错误日志）${Font_color_suffix}" && echo echo -e "确定要切换为 ${Green_font_prefix}简单模式（只输出错误日志）${Font_color_suffix}？[y/N]" read -e -p "(默认: n):" connect_verbose_info_ny [[ -z "${connect_verbose_info_ny}" ]] && connect_verbose_info_ny="n" if [[ ${connect_verbose_info_ny} == [Yy] ]]; then ssr_connect_verbose_info="0" Modify_config_connect_verbose_info Restart_SSR else echo && echo " 已取消..." && echo fi fi}Set_crontab_monitor_ssr(){ SSR_installation_status crontab_monitor_ssr_status=$(crontab -l|grep "ssrmu.sh monitor") if [[ -z "${crontab_monitor_ssr_status}" ]]; then echo && echo -e "当前监控模式: ${Green_font_prefix}未开启${Font_color_suffix}" && echo echo -e "确定要开启为 ${Green_font_prefix}ShadowsocksR服务端运行状态监控${Font_color_suffix} 功能吗？(当进程关闭则自动启动SSR服务端)[Y/n]" read -e -p "(默认: y):" crontab_monitor_ssr_status_ny [[ -z "${crontab_monitor_ssr_status_ny}" ]] && crontab_monitor_ssr_status_ny="y" if [[ ${crontab_monitor_ssr_status_ny} == [Yy] ]]; then crontab_monitor_ssr_cron_start else echo && echo " 已取消..." && echo fi else echo && echo -e "当前监控模式: ${Green_font_prefix}已开启${Font_color_suffix}" && echo echo -e "确定要关闭为 ${Green_font_prefix}ShadowsocksR服务端运行状态监控${Font_color_suffix} 功能吗？(当进程关闭则自动启动SSR服务端)[y/N]" read -e -p "(默认: n):" crontab_monitor_ssr_status_ny [[ -z "${crontab_monitor_ssr_status_ny}" ]] && crontab_monitor_ssr_status_ny="n" if [[ ${crontab_monitor_ssr_status_ny} == [Yy] ]]; then crontab_monitor_ssr_cron_stop else echo && echo " 已取消..." && echo fi fi}crontab_monitor_ssr(){ SSR_installation_status check_pid if [[ -z ${PID} ]]; then echo -e "${Error} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] 检测到 ShadowsocksR服务端 未运行 , 开始启动..." | tee -a ${ssr_log_file} /etc/init.d/ssrmu start sleep 1s check_pid if [[ -z ${PID} ]]; then echo -e "${Error} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] ShadowsocksR服务端 启动失败..." | tee -a ${ssr_log_file} && exit 1 else echo -e "${Info} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] ShadowsocksR服务端 启动成功..." | tee -a ${ssr_log_file} && exit 1 fi else echo -e "${Info} [$(date "+%Y-%m-%d %H:%M:%S %u %Z")] ShadowsocksR服务端 进程运行正常..." exit 0 fi}crontab_monitor_ssr_cron_start(){ crontab -l > "$file/crontab.bak" sed -i "/ssrmu.sh monitor/d" "$file/crontab.bak" echo -e "\n* * * * * /bin/bash $file/ssrmu.sh monitor" >> "$file/crontab.bak" crontab "$file/crontab.bak" rm -r "$file/crontab.bak" cron_cOnfig=$(crontab -l | grep "ssrmu.sh monitor") if [[ -z ${cron_config} ]]; then echo -e "${Error} ShadowsocksR服务端运行状态监控功能 启动失败 !" && exit 1 else echo -e "${Info} ShadowsocksR服务端运行状态监控功能 启动成功 !" fi}crontab_monitor_ssr_cron_stop(){ crontab -l > "$file/crontab.bak" sed -i "/ssrmu.sh monitor/d" "$file/crontab.bak" crontab "$file/crontab.bak" rm -r "$file/crontab.bak" cron_cOnfig=$(crontab -l | grep "ssrmu.sh monitor") if [[ ! -z ${cron_config} ]]; then echo -e "${Error} ShadowsocksR服务端运行状态监控功能 停止失败 !" && exit 1 else echo -e "${Info} ShadowsocksR服务端运行状态监控功能 停止成功 !" fi}Update_Shell(){ sh_new_ver=$(wget --no-check-certificate -qO- -t1 -T3 "***/ToyoDAdoubi/doubi/master/ssrmu.sh"|grep 'sh_ver="'|awk -F "=" '{print $NF}'|sed 's/\"//g'|head -1) && sh_new_type="github" [[ -z ${sh_new_ver} ]] && echo -e "${Error} 无法链接到 Github !" && exit 0 if [[ -e "/etc/init.d/ssrmu" ]]; then rm -rf /etc/init.d/ssrmu Service_SSR fi cd "${file}" wget -N --no-check-certificate "***/ToyoDAdoubi/doubi/master/ssrmu.sh" && chmod +x ssrmu.sh echo -e "脚本已更新为最新版本[ ${sh_new_ver} ] !(注意：因为更新方式为直接覆盖当前运行的脚本 ， 所以可能下面会提示一些报错 ， 无视即可)" && exit 0}# 显示 菜单状态menu_status(){ if [[ -e ${ssr_folder} ]]; then check_pid if [[ ! -z "${PID}" ]]; then echo -e " 当前状态: ${Green_font_prefix}已安装${Font_color_suffix} 并 ${Green_font_prefix}已启动${Font_color_suffix}" else echo -e " 当前状态: ${Green_font_prefix}已安装${Font_color_suffix} 但 ${Red_font_prefix}未启动${Font_color_suffix}" fi cd "${ssr_folder}" else echo -e " 当前状态: ${Red_font_prefix}未安装${Font_color_suffix}" fi}check_sys[[ ${release} != "debian" ]] && [[ ${release} != "ubuntu" ]] && [[ ${release} != "centos" ]] && echo -e "${Error} 本脚本不支持当前系统 ${release} !" && exit 1action=$1if [[ "${action}" == "clearall" ]]; then Clear_transfer_allelif [[ "${action}" == "monitor" ]]; then crontab_monitor_ssrelse echo -e " ShadowsocksR MuJSON一键管理脚本 ${Red_font_prefix}[v${sh_ver}]${Font_color_suffix} ---- Toyo | doub.io/ss-jc60 ---- ${Green_font_prefix}1.${Font_color_suffix} 安装 ShadowsocksR ${Green_font_prefix}2.${Font_color_suffix} 更新 ShadowsocksR ${Green_font_prefix}3.${Font_color_suffix} 卸载 ShadowsocksR ${Green_font_prefix}4.${Font_color_suffix} 安装 libsodium(chacha20)———————————— ${Green_font_prefix}5.${Font_color_suffix} 查看 账号信息 ${Green_font_prefix}6.${Font_color_suffix} 显示 连接信息 ${Green_font_prefix}7.${Font_color_suffix} 设置 用户配置 ${Green_font_prefix}8.${Font_color_suffix} 手动 修改配置 ${Green_font_prefix}9.${Font_color_suffix} 配置 流量清零———————————— ${Green_font_prefix}10.${Font_color_suffix} 启动 ShadowsocksR ${Green_font_prefix}11.${Font_color_suffix} 停止 ShadowsocksR ${Green_font_prefix}12.${Font_color_suffix} 重启 ShadowsocksR ${Green_font_prefix}13.${Font_color_suffix} 查看 ShadowsocksR 日志———————————— ${Green_font_prefix}14.${Font_color_suffix} 其他功能 ${Green_font_prefix}15.${Font_color_suffix} 升级脚本 " menu_status echo && read -e -p "请输入数字 [1-15]：" numcase "$num" in 1) Install_SSR ;; 2) Update_SSR ;; 3) Uninstall_SSR ;; 4) Install_Libsodium ;; 5) View_User ;; 6) View_user_connection_info ;; 7) Modify_Config ;; 8) Manually_Modify_Config ;; 9) Clear_transfer ;; 10) Start_SSR ;; 11) Stop_SSR ;; 12) Restart_SSR ;; 13) View_Log ;; 14) Other_functions ;; 15) Update_Shell ;; *) echo -e "${Error} 请输入正确的数字 [1-15]" ;;esacfi

推荐阅读


上一篇：空气能热水器简介 空气能热水器不制热原因

下一篇：空气能热水器出水不热的原因 空气能热水器出水不热解决方法